FREE shipping Australia wide for qualifying products on orders over AU$299.

RCA Allen RCA 2610-3 – Skid / Slip Indicator

2 in stock (can be backordered)

AUD $235.00 

An optional Slip/Skid Indicator (inclinometer) is available for the RCA2610 (all models).

The instrument can be purchased with the Slip Indicator attached or purchased separately and installed by the user (part number 444-0010-01).

The addition of a Slip Indicator satisfies the requirements for FAA’s AC 91-75.

The slip indicator may be attached before or after the instrument has been installed in the aircraft.

2 in stock (can be backordered)

An optional Slip/Skid Indicator (inclinometer) is available for the RCA2610 (all models).

The instrument can be purchased with the Slip Indicator attached or purchased separately and installed by the user (part number 444-0010-01).

The addition of a Slip Indicator satisfies the requirements for FAA’s AC 91-75.

The slip indicator may be attached before or after the instrument has been installed in the aircraft.
INSTALLATION
1. Apply power to the instrument to assure that it reads level in pitch and roll.
2. Remove two screws on the face of the instrument.
3. Align slip indicator with holes and replace screws. Do not tighten.
4. Adjust the slip indicator until the bubble is centred and tighten screws just enough to secure Slip Indicator.
Do not over tighten.

Find your Part Number & Read More...

Suits RC Allen Digital RCA 2610 series Attitude Gyros.

 

  • Inclinometer only
  • No hardware

Reviews

There are no reviews yet.

Be the first to review “RCA Allen RCA 2610-3 – Skid / Slip Indicator”

Your email address will not be published. Required fields are marked *

You may also like…

  • RCA Allen RCA 2610-3 Digital Attitude Gyro – PITCH SYNC

    AUD $4,395.00 

An optional Slip/Skid Indicator (inclinometer) is available for the RCA2610 (all models).

The instrument can be purchased with the Slip Indicator attached or purchased separately and installed by the user (part number 444-0010-01).

The addition of a Slip Indicator satisfies the requirements for FAA’s AC 91-75.

The slip indicator may be attached before or after the instrument has been installed in the aircraft.
INSTALLATION
1. Apply power to the instrument to assure that it reads level in pitch and roll.
2. Remove two screws on the face of the instrument.
3. Align slip indicator with holes and replace screws. Do not tighten.
4. Adjust the slip indicator until the bubble is centred and tighten screws just enough to secure Slip Indicator.
Do not over tighten.

Find your Part Number & Read More…